製品紹介
  • HOME
  • CORPORATE PROFILE
  • PRODUCT INTRODUCTION
  • ACCESS
  • INQUIRY
  • QUALITY ENVIRONMENT
  • PRODUCT
  • EMBOSSED CARRIER TAPES
  • TAPING MACHINE
  • LED SORTING MACHINE
  • CHIP SORTER/PROBER
  • TESTER
  • OTHERS
  • SOFTWERA
Home > Product Introduction > Others

その他機械装置

Auto Reel Changer
NPT-300  Embossd Carrier Tape Peeling Force Tester

  ※YAC Garter Products Guide ⇒


  Auto Reel Changer
Auto Reel Changer  

 Auto reel changer is the machine which rewind the carrier
tape and change the reel automatically.

[Characteristics]
・Rewind the carrier tape and change reel without stopping
  the taping machine.
・φ180-φ380 rewinding reel would be adopted (reel diameter
  should be fixed at first).
・8.0mm- 32mm of tape width could be adopted (tape width
  can be changed).

 Specification
Carrier Tape Embossd CT: Total thickness 0.2-1.6mm
Paper CT: Total thickness 0.2-1.2mm
Tape Width 8,12,16,24,32mm
  ※Width can be changed with change kit.
Insert Pitch 2,4,8,12mm ※Setting can be chang
How to set the tape End tape,Crape tape,Inserting reel groove
  ※Specification is fixed at first.
Winding Reel φ180,254,330,380
  ※Specification is fixed at first.
Winded reel 8mm:25R,12mm:18R,16mm:15R
24mm:10R,32mm:8R
Conveying Direction Right direction(feed perforation is front side)
or Left direction(feed perforation is far side)
Trailer 100-230mm
Leader 100-1000mm
Power supply Single Phase 100V 50/60Hz
Size Depends on specification

▲Returns on the page



  NPT-300
Embossd Carrier Tape Peeling Force Tester

・Constant peeling angle ensures repeatability of measured data.
・Peeling speed can be set to match JIS regulation.Adjustable from 120 to
  300mm/min.
・The liquid crystal display and touch panel allows setting of detailed conditions.
・Maximum value,minimum value,average value,standard deviation,CPK,and all
  data are collected and calculated.Lot control is simple
・Total values,graphs,figures,measurement condition,taping condition,memos can
  be printed with the embedded printer.
・A graph is displayed on the screen during measurement.A timer can be set,
 and the operation after starting the measurement is now completely automatic.
・Japanese display/English display,and a change are possible.
・gf display/N display,and a change are possible.
・NPT-300 can transmit data top PC by using USB.

 Specification
Extemal Size W240 x H230 x D335mm
Weight 9kg
Applicable Tape Width 8 to 56mm
Measurable Strength Range 0 to 2N (0 to 200gf)
Resolution 0.001N (0.1gf)
Peeling Speed MAX approx.,300mm/min
Measuring Speed 4 points/sec 20 points/sec
Measurable Length 7.5m 1.5m
Printer Thermal printer
Recording Media USB flash memory
Data Transfer USB Ver2.0
Voltage Rating 100 to 240 VAC(50/60Hz)

▲Returns on the page



※The specification of the product might change without a previous  notice.
※Please note that the picture of products may be different from actual  ones depending on shooting & printing conditions.
Returans on the page